Transmitters

JUMO dTRANS T03

Two-wire or three-wire transmitter Basic type: 707030

The transmitters intended for industrial applications acquire the temperature with two-wire or three-wire connection. The continuous analog signal path allows for extremely quick output reaction times in the event of a temperature change (analog permanent measurement instead of digital sampling rate).

Smallest measuring span 25 Kelvin
Two-wire, 4 to 20 mA, three-wire, 0 to 10 V
Pt100 (two-wire, three-wire connection)

Sale

JUMO dTRANS T01

Two-wire transmitter Basic type: 707010

The two-wire transmitter acquires the temperature through an RTD temperature probe or a thermocouple. For RTD temperature probes, the probe can be connected in a two-wire circuit, three-wire circuit, or four-wire circuit. The dTRANS T01 Ex is designed for mounting in a potentially explosive area.

Pt100 internal
Sampling rate: > 1 measurement per second
Output signal 4 to 20 mA

Topseller

JUMO dTRANS T05

Programmable transmitter in two-wire technology Basic type: 707050

The transmitters acquire sensor signals from RTD temperature probes, thermocouples, resistance transmitters, or resistors/potentiometers in two-wire, three-wire, or four-wire circuits.

Output signal 4 to 20 mA/0 to 10 V
Temp in °C or °F
Voltage signals -100-+1100 mV

Topseller

JUMO dTRANS T06

Multifunctional four-wire transmitter in mounting rail case Basic type: 707071

The transmitter acquires the temperature through an RTD temperature probe or a thermocouple (double thermocouple). The transmitter can also acquire standard signals. Connection takes place through an RTD temperature probe with two-wire, three-wire, or four-wire connection.

1 universal measurement input
RS485 interface Modbus-RTU
SIL 2/SIL 3 according to DIN EN 61508

New product

JUMO dTRANS T06 Junior

Multifunctional four-wire transmitter in mounting rail case Basic type: 707070

The JUMO dTRANS T06 Junior multifunction four-wire transmitter is the solution for a wide range of applications in plant engineering due to its galvanic isolation and customer-specific linearization. This entry-level model has a width of only 17.5 mm so that it takes up little space in a control cabinet.

1 universal input
Small size 17.5 mm
High level of galvanic isolation

JUMO dTRANS T06 Ex

Multifunctional four-wire transmitter in mounting rail case with SIL and Ex approval Basic type: 707075

Above all the JUMO dTRANS T06 Ex multifunctional four-wire transmitter is characterized by its high level of safety. The multipurpose unit of the brand JUMO Safety Performance allows the establishment of safe temperature measuring chains (SIL 2 or 3), which allow the temperature sensor to be used in Ex zone 0.

1 universal measurement input
RS485 interface with Modbus RTU
SIL 2/SIL 3 according to DIN EN 61508

JUMO dTRANS S08 xx

Signal and isolating converter – 6 mm series Basic type: 707203

The JUMO dTRANS S08 signal and isolating converters in 6 mm wide slimline housing convert, isolate, and measure any type of standard signal to ensure safe and reliable plant processes.

Ambient temperature: -25 to +70 °C
Response time <7 ms
Power consumption <0.65 to 1.2 W

JUMO Wtrans B

Head transmitter with wireless data transmission Basic type: 707060

The wireless transmitter measures temperature and other process variables. The compact design type of the aerial battery housing allows for simple installation on type B DIN terminal head.

Radio frequency 868.4 MHz
Transmission interval (1 to 3600 s)
Range up to 300 m

JUMO dTRANS T07

Two-channel temperature transmitter with HART®/Ex/SIL Basic type: 707080

The JUMO dTRANS T07 device series is a two-channel temperature transmitter with HART® communication. The devices are available in 2 versions: for installation in a B-head or for DIN-rail mounting. The versions with Ex and SIL approval for SIL 2/3 enable reliable use.

2 universal measuring inputs
HART® 7 protocol
SIL 2/3 hardware/software

JUMO dTRANS T08 xx

Temperature transmitter series 6 mm Basic type: 707101

Temperature transmitters transform the physical temperature signal into a standardized output signal and therefore form the basis of a smooth process flow. Therefore the quality of the signal is crucial. For this purpose, the JUMO dTRANS 08 series in slimline housing ensures a high level of accuracy.

Ambient temperature: -25 to +70 °C
Selectable response time < 30 ms/300 ms
Low power consumption: <0.65 to 1.2 W

JUMO dTRANS T09

Cable transmitter for temperature Basic type: 707090

The temperature transmitter for Pt100 or Pt1000 sensors is ideal for simple retrofitting of plants. The user can choose between an analog output or an IO-Link interface. The cable transmitter's high level of vibration and shock resistance makes it reliable and durable.

For Pt100 or Pt1000
M12 connection on both sides
Output: 4 to 20 mA or IO-Link

Sale

JUMO dTRANS T02

Four-wire transmitter Basic type: 707020

JUMO dTRANS T02 transmitters are equipped with a microprocessor for digital signal processing. The input and the output are galvanically isolated. It can be installed on DIN rails. Electrical connection via screw terminals for strand or wire.

Sampling rate: > 1 measurement per second
Two-wire, three-wire, or four-wire circuit
Output 0/4 to 20 mA

New product

JUMO Ex-i Isolating Switch Amplifier

Two-channel isolating switch amplifier for Ex applications Basic type: 707540

The intrinsically safe isolation switching amplifier ensures reliable, galvanic isolation and safe transmission of switching signals in Ex applications. It can be mounted in Ex zone 2 and the sensor can be operated in zone 0. The JUMO Ex-i isolating switching amplifier is ideal for JUMO NESOS float switches with 2 switch contacts and also supports NAMUR proximity sensors.

2 channels
Galvanic three-way isolation
Line fault detection

JUMO Ex-i repeater power supply and input isolating amplifier

For intrinsically safe [Ex i] transmitters Basic type: 707530

The device is designed for operation in intrinsically safe [Ex i] transmitters and mA current sources installed in Ex areas. The connected two-wire transmitters are supplied with energy and analog 0/4 to 20 mA measured values are transmitted from the Ex area to the non-Ex area.

Analog 0/4 to 20 mA measured values
Supply 24 to 230 V
Galvanic three-way isolation

JUMO Wtrans receiver

Universal receiver for JUMO wireless measuring probes Basic type: 902931

The Wtrans receiver T01, in combination with suitable Wtrans transmitters, is used for the mobile or stationary measurement of the following physical measurands: temperature, pressure, and humidity. The wireless sensor technology also works in a harsh industrial environment.

Signals (0(4) to 20 mA, 0 to 10 V)
RS485 interface
Open air range 300 m

Temperature transmitters

Transmitters

We are at your service